Custom Decorative Panels

1/8″ Brass Sheet

Luxe metallic finish for a bold, modern look.

Cutting method: Laser cut only. Brass sheets require laser cutting and cannot be CNC routed.

Laser cutting: Produces sharp corners and fine details, and allows for 90° cuts. Please note that laser cutting will leave burn marks on the panel surface.

1/4″ MDF

Smooth and versatile, ready to paint or finish.

Laser cut: Produces sharp corners and fine details, and allows for 90° cuts. Please note that laser cutting will leave burn marks on the panel surface.

CNC routed: No burn marks. Can create a 3D effect through varied depth cuts. All corners will have a minimum 1/16″ radius. Pricing increases with smaller radii and more intricate detail.

1/4″ MDF with Hardwood Veneer

Adds natural beauty and warmth to any space.

Laser cut: Produces sharp corners and fine details, and allows for 90° cuts. Please note that laser cutting will leave burn marks on the panel surface.

CNC routed: No burn marks. Can create a 3D effect through varied depth cuts. All corners will have a minimum 1/16″ radius. Pricing increases with smaller radii and more intricate detail.

Cutting Method

Select the cutting method you’d like for the panel. Please note brass sheets can ONLY be laser cut.

Laser Cut

Advantages: Produces sharp corners and fine details, and allows for 90° cuts.

Disadvantages: Laser cutting will leave burn marks on the panel surface.

Maximum panel size: 36″ W × 52″ H

CNC Routed

Advantages: No burn marks after cutting. Can create a 3D effect through varied depth cuts.

Disadvantages: All corners will have a minimum 1/16″ radius. Pricing increases with smaller radii and more intricate detail.

Maximum panel size: 48″ W × 96″ H

Please enter your desired panel dimensions in inches. Maximum sizes are as follows:

Laser Cut (all materials): 36″ W × 52″ H
CNC Routed: 48″ W × 96″ H

Your selected design must leave at least 1″ of clearance from any outside edge of the panel.

Lasered Panel Width (inches)(Required)

Please enter a number from 1 to 36.

Lasered Panel Height (inches)(Required)

Please enter a number from 1 to 52.

CNC Routed Panel Width (inches)(Required)

Please enter a number from 1 to 48.

CNC Routed Panel Height (inches)(Required)

Please enter a number from 1 to 96.

Quantity

Minimum order quantity is 2 panels. Larger panels may qualify for an exception. Please mention if you only want one panel in the notes section at the bottom of this form.

Number(Required)

Please enter a number from 2 to 99.

Pattern / Design Selection

Choose from our catalog of pre-designed patterns, or supply your own custom design. If you are providing your own design, please note the following:

Providing your file in .DXF format will incur the lowest additional cost.
If your file is in another format, our team can convert it for you — however this will incur a higher additional cost.

Regardless of the design source, your pattern must leave at least 1″ of clearance from any outside edge of the panel.

Once we receive your quote request and send it to our factory for analysis and pricing, a proof will be sent to you for approval before any work begins.

Pattern / Design Selection

Choose from our catalog of pre-designed patterns, or supply your own custom design. If you are providing your own design, please note the following:

Providing your file in .DXF format will incur the lowest additional cost.
If your file is in another format, our team can convert it for you — however this will incur a higher additional cost.

Regardless of the design source, your pattern must leave at least 1″ of clearance from any outside edge of the panel.

Once we receive your quote request and send it to our factory for analysis and pricing, a proof will be sent to you for approval before any work begins.

Click here to view our pattern catalog

Pattern Number(Required)

Enter the pattern number you’d like to use here.

Custom Design File Upload(Required)

Drop files here or

Max. file size: 2 GB.

Have a design of your own? Upload it here. Please note: we require designs to be .dxf format. If you provide a file in another format, there will be an additional conversion fee.

Design Placement(Required)

Describe where on the panel you’d like your design placed. For example: centered, upper center, lower center, offset to the left, etc. If you have specific measurements from an edge, feel free to include those here.

Cut-to-Size Decorative Grille

Cut-to-Length Materials

NEW! Custom Decorative Panels